|
|
Apartment building
Danielová, Marie ; Vystrčil, Jan (referee) ; Šuhajda, Karel (advisor)
The aim of the bachelor’s thesis is to processing of the design documentation for a newly-built apartment building. The apartment building is located in Havlíčkův Brod. The building has four above-ground floors and one basement. In the basement there are cellars, technical facilities, a common room, a bicycle room and a cleaning room. There are 8 residential units on the upper floors. The apartments on the ground floor are wheelchair accessible. The apartments on the second to fourth floor have their own balcony. On the second floor there is a common terrace. The apartment building is based on strip foundations made of plain concrete. External walls in the basement are made of calcium silicate blocks and the external walls of the above-ground floors are made of aerated concrete blocks. The floor structure is prefabricated structure, which is made of reinforced concrete beams and aerated concrete inserts. The roofing of the building is made of a vegetation single-skin flat roof. The building is insulated with the ETICS contact insulation system.
|
|
|
Wellness Hotel
Kašpárová, Darina ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The subject of the diploma thesis is to elaborate the project documentation of a newbuilt wellness hotel located in the village of Lipno nad Vltavou. The building is designed as a non-basement one with three floors. It is visually divided into several parts. On the first floor there are two operational parts – a wellness and a restaurant. On the second and third floor there are small apartments for temporary guests' accommodation. The building foundations are made of concrete and reinforced concrete. The load-bearing structure is made of aerated concrete blocks and sand-lime blocks. The ceiling structures are made of cast-in-place reinforced concrete. The roof of the first floor is designed as a one-layer flat extensive green roof. The roofing of a main reception is designed by a sloping roof and the third floor as three adjoining sloping roofs. These roofs are formed by a system of aerated concrete roof panels and a water-dissipating layer of folded sheet metal. The building is insulated with an external thermal insulation composite system (ETICS). The part of the facade consist of facade cladding strips and part of the render of light color.
|
|
|
Public library with cafeteria
Vlach, Ondřej ; Pospíšil, Tomáš (referee) ; Pěnčík, Jan (advisor)
The aim of this diploma thesis is to create a detailed design of a public library with cafeteria. The building is situated in the developing city area of Jihlava in the cadastral area of Horní Kosov. It has four storeys above ground and no basement floor. The 4th floor has a smaller net floor area than the rest floors. The building is designed also for disabled people. The expected number of employees is 18 and the number of visitors is 150 in a daily average. An entrance to the property is on the Vrchlického street. There is a parking lot in front of the building with a total capacity of 50 parking spaces including three parking spaces for disabled. The cafeteria and its facilities are situated in the ground floor of the building. Browsing area is situated in the second and third floor. The type of the structure is a frame structure with infill walls made of aerated concrete. The building has a double-skin facade. The cladding of the facade is made of fibre-cement boards. There is a curtain wall designed at some sections of the facade. The building has a warm flat roof with a parapet wall and interior roof drains.
|
|
|
Detached house
Bajtošová, Lenka ; Struhala, Karel (referee) ; Jelínek, Petr (advisor)
The subject of the following bachelor thesis is the design of a family house in Soběšice, which also includes a flower shop. The building has two floors and is divided into three basic units. The flower shop is located on the ground floor with direct access from the road. The social zone of the residential part of the building covers the remaining part of the ground floor, behind the flower shop, with direct access to the terrace. On the second floor all the individual rooms of residents are situated, with a shared bathroom and with a access to two vegetation roofs covering the whole building floor. From a structural point of view, the house is designed as a masonry building made of aerated concrete blocks insulated with expanded polystyrene 150 mm thick, with reinforced concrete ceilings and a shed roof above the second floor. The bachelor thesis is elaborated in the form of project documentation for construction realization.
|
|
|
Apartment building
Jachan, Radek ; Galata, Jindřich (referee) ; Lavický, Miloš (advisor)
The aim of the bachelor's thesis is the elaboration of project documentation for the design of an apartment building in the village of Pustiměř. The building is designed as a detached house. It has a rectangular shape and is covered by a flat single-skin roof. On the first floor there is a background of the house and a garage, other parking spaces are provided on the plot. The floors of the 2nd floor, 3rd floor, 4th floor are used for living and there are a total of 6 housing units, each with a size of 4 + kk. The apartment building is brick with a contact thermal insulation system, the 1st floor made of lost BEST formwork cast in concrete and tied with fittings, and the 2nd floor made to the 4th floor made of YTONG aerated concrete blocks. The ceiling structure is reinforced concrete monolithic. Part of the project documentation is also a basic assessment of the building in terms of building physics.
|
|
|
Library and leisure centre in Slavkov u Brna
Korábková, Adriena ; Sukop, Lukáš (referee) ; Ostrý, Milan (advisor)
The main goal of this Master’s thesis is the elaboration of project documentation for a library and leisure centre in Slavkov u Brna. The project is divided into three parts. The first part is focused on architectural and structural design. The building will have two floors and a flat roof. The leisure centre will be located on the first floor and the public library on the second floor. The load-bearing walls will be made of aerated concrete blocks. The floor and roof structures will be made of reinforced concrete. The facade will be designed as ventilated. The second part of the thesis is focused with the design of selected building services: HVAC, rainwater management, lighting and photovoltaics. The building will be mechanically ventilated. Space and domestic hot water heating will be provided by heat pumps (air / water). Rainwater will be collected and used for irrigation. Electricity consumption will be partly covered by a photovoltaic power plant from the flat roof. The third part of the thesis is focused on the evaluation of the building in terms of the multicriteria analysis method. For this evaluation the national methodology SBToolCZ is used.
|
|
|
Community Center for Seniors
Fišarová, Jana ; Valenta, Michal (referee) ; Rusinová, Marie (advisor)
The subject of my diploma thesis is a proposal of a new community center for seniors near Brno in the village Pravlov. The building is designed for 12 people in 11 separate housing units. The building is divided into three floors. On the ground floor there are civic amenities (doctor's office, hairdresser) and technical facilities (utility room, cleaning room, facilities for employees). On the second and third floors there are separate apartments 1 + 1 and 1 + kk. Vertical walls are made of aerated concrete blocks, horizontal structures are made of reinforced concrete monolithic ceiling structures. The vertical connection between the individual floors is created by a prefabricated staircase. The community center for seniors is covered by a vegetation roof and part of the building is covered by a flat roof. On the south side of the building is located balcony.
|
|
|
Multifunctional Building in Jičín
Imlauf, Vítězslav ; Pilinszki, Martin (referee) ; Beneš, Petr (advisor)
The subject of the thesis is the design of a multifunctional building in Jičín, which includes underground parking garages with cellars, technical facilities, administrative parts, commercial premises, medical facilities and apartments. The building is a five-story detached building with a full basement. The floor plan of the building is an irregular polygonal shape approaching the letter L. The structural system of the building is designed as a combined monolithic reinforced concrete skeleton with reinforcing reinforced concrete wall cores and ceilings. The foundation structures are made up of a foundation slab with foundation belts made of waterproof concrete placed on drilled piles. The roofing consists of a single-layer flat vegetation roof. The perimeter shell of the above-ground floors is designed from aerated concrete blocks with a contact insulation system made of mineral basalt wool.
|
|
|
Energy-saving building of a family house in Třebíč
Kousalíková, Jana ; Počinková, Marcela (referee) ; Blasinski, Petr (advisor)
The aim of the bachelor’s project is to design a detached passive house. The project is focused the structural and architectural design, the design some of building services, building physics and fire safety of building. The plot is situated in the south of Třebíč and terrain is almost flat. The entrance to the plot is in the north and the entrance to the house is in the west. The house has two floors and flat roof, the carport has flat green roof. On the first floor there is a wind lobby, cloakroom and utility room, hallway, guest room, bathroom and big open space which includes kitchen and living room. On the second floor there are three habitable rooms: bedroom, two children’s rooms, bathroom, toilet and two dressing rooms. The structural system consists of masonry walls. External walls are form sand-lime blocks with ETICS, load-bearing walls are from sand-lime blocks and partitions are from aerated concrete blocks. The floor slabs are from prestressed hollow core slabs and the building is based on strip foundations and permanent formwork blocks. The building services which are designed in this project are heating, mechanical ventilation, electricity service cable and stormwater management. In the house there is a mechanical ventilation unit with heat recovery. Heating is provided by air source heat pump and the stormwater is stored in the accumulation tank. Stormwater will be used to watering the garden and the excess of stormwater will be infiltration into the soil. Part of the electricity is provided by photovoltaic panels on the flat roof. The part of project is certificate of energy performance of building, rating of construction for heat conduction, acoustics, daylighting and their assessment with legislation.
|
|
|
Apartment building in Kyjov town
Vlach, Adam ; Žajdlík, Tomáš (referee) ; Šuhajdová, Eva (advisor)
The subject of the bachelor's thesis is processing of design documentation for the construction of an apartment building. The thesis contains a graphic and textual part. The graphic part contains individual drawings, which are an essential part of the design documentation for the construction of a building. The text part contains technical reports on the given object, lists of used compositions and elements, and assessment reports of building physics. The proposed apartment building is located in a newly emerging construction site on the outskirts of the Kyjov town. It is a basement building with four above-ground floors covered with a warm flat roof. The apartment building is divided into eight apartment units, which are accessible from the north-facing access gallery. The individual floors of the access gallery are connected by a double-arm reinforced concrete staircase and an elevator shaft with a traction elevator. The terraces of the individual apartment units are oriented towards the south. There are 1-bedroom, 2-bedroom, 3-bedroom and 4-bedroom apartments in the building. The basement of the building is used for home amenities of the apartment building and for three separate garages with one parking space. Structurally, the object is designed mainly as a masonry of aerated concrete blocks and sand-lime blocks in combination with monolithic reinforced concrete structures. The building is based on monolithic reinforced concrete strips. The wall structures of the basement, the structure of the access gallery and the floor structures are designed as monolithic reinforced concrete structures. The external wall constructions are insulated with a contact insulation system made of stabilized polystyrene with a thickness of 200mm thermal insulation. The object is visually divided into simple blocks with a color solution in shades of gray. The facade of the building is supplemented with a facade trellis with climbing plants. In addition to drawings and technical reports, an assessment reports of fire safety and also an assessment reports of building physics are made for the proposed object. All assessments meet the given requirements.
|
guest ::
